Rubber Water Bars & Water Diversion
Rubber water bars and water diversion made from used conveyor belts provide a practical way to redirect water, prevent erosion, slow runoff, protect surfaces, and manage wet areas. U.S. Belt Co. sells cost-effective used conveyor belts for water control, drainage support, erosion reduction, road protection, and temporary site management. Used belting can be cut and placed as water bars, diversion strips, channel liners, ditch protection, or runoff barriers.
Rubber Water Bars for Roads, Trails, and Access Paths
Rubber water bars made of used conveyor belt help move water off roads, trails, driveways, and access paths before runoff creates deeper ruts, washouts, or muddy channels. Instead of letting water travel straight down a road or path, a rubber water bar can help guide runoff toward the side where it can drain more naturally.
Used conveyor belt works well for this type of application because it is durable, flexible, and able to handle outdoor conditions. These rubber strips can be used on gravel roads, farm lanes, mine roads, jobsite access roads, logging roads, ATV trails, private drives, and other areas where water needs to be redirected away from the main travel path.
Water Diversion for Runoff Control
Runoff can cause problems quickly when water keeps flowing along the same path. Over time, it can wash away gravel, expose soil, damage work areas, and create soft, muddy ground. Rubber water diversion mats made from used conveyor belts can help create a practical barrier that redirects water away from problem areas.
These mats can be used around slopes, work areas, storage zones, equipment paths, entrances, field edges, and temporary access areas. They're especially useful where crews need a flexible water control option that can be placed, moved, cut, and reused as site conditions change.
Rubber Belting for Drainage Channels and Ditches
Drainage channels, ditches, and low areas often take the hardest abuse during heavy rain. Fast-moving water can erode soil, move gravel, undercut edges, and make maintenance harder over time. Used conveyor belt can be repurposed as rubber lining or surface protection in areas where water flow needs to be controlled.
Depending on the setup, used belting may be used along ditch bottoms, channel edges, drainage paths, culvert approaches, swales, and other water flow areas. It can help protect surfaces from direct water impact while providing a durable rubber layer in places where soil, rock, or gravel may break down.
Erosion Control for Problem Areas
Erosion often starts small, then turns into a bigger repair job. A shallow rut, soft edge, or washed-out spot can quickly grow when water keeps moving across the same area. Rubber belting can help protect vulnerable surfaces by creating a tough barrier between flowing water and the ground underneath.
Used conveyor belt may be useful near slopes, low spots, entrances, road edges, culvert areas, creek crossings, drainage outlets, and places where runoff repeatedly cuts into the surface. It is not a replacement for engineered drainage when a site needs it, but it can be a practical material for many water management and surface protection needs.
Rubber Mats for Wet Work Areas
Not every water problem is about redirecting runoff. Sometimes the issue is simply working around wet, muddy, or unstable areas. Used conveyor belt can be used as heavy-duty rubber matting around pumps, tanks, hoses, wash areas, storage spots, equipment zones, and temporary workspaces where water creates messy or difficult conditions.
These mats can help create a more usable surface in areas where people, tools, materials, or equipment need to keep moving. They can also help protect the ground from repeated traffic, standing water, mud, and wear caused by wet conditions.
Used Conveyor Belt for Temporary Water Management
Some water problems are seasonal. Others only happen during a project, storm event, construction phase, or equipment move. Used conveyor belt gives buyers a flexible material that can be cut, placed, moved, and reused without committing to a permanent water control product.
This makes it useful for temporary drainage support, runoff direction, water flow barriers, wet access areas, pump sites, staging areas, and cleanup zones. When the job changes, the rubber belting can often be moved to the next problem area instead of being discarded after one use.
A Cost-Effective Alternative to New Water Control Products
New rubber mats, drainage products, and erosion control materials can be expensive, especially when you need large sections or multiple pieces across a property, road, or jobsite. Used conveyor belt gives buyers a more affordable option while still providing the strength needed for demanding outdoor conditions.
For many customers, the value is simple. You get heavy-duty rubber material that can be cut, moved, reused, and repurposed for water bars, water diversion mats, drainage paths, ditch protection, erosion control, and wet work areas at a fraction of the cost. It is a practical solution for managing water without overpaying for new rubber material. Contact Art for inventory.
Used Conveyor Belt Applications
U.S. Belt Co. supplies affordable used conveyor belt and ground protection mats for demanding work areas, job sites, farms, industrial yards, and equipment applications. Explore common uses below.
Rubber Water Bars & Water Diversion FAQs
Yes. Used conveyor belt can be cut and placed as rubber water bars to help redirect runoff on gravel roads, access paths, farm lanes, mine roads, trails, driveways, and worksite roads. Placement, slope, water volume, and site conditions all affect how well the water bar performs.
No. Rubber water bars and water diversion mats can help manage runoff in many practical situations, but they are not a replacement for engineered drainage when a site requires it. They are best used for redirecting water, reducing erosion, and protecting problem areas where a flexible material makes sense.
Rubber water diversion mats can be used near road edges, slopes, ditches, culverts, drainage paths, field edges, entrances, storage areas, pump sites, and temporary work areas. They can help guide water away from surfaces that are starting to rut, wash out, or become muddy.
Yes. Depending on how they are installed, used conveyor belt water bars and diversion strips can often be moved, adjusted, or reused as drainage patterns change. This makes them useful for temporary projects, seasonal runoff, changing jobsites, and areas where a permanent drainage fix is not needed.
U.S. Belt Co. | Since 1981
U.S. Belt Co. provides light-duty and heavy-duty used rubber conveyor belting for mining, along with ground protection mats and mud mats for construction sites, heavy equipment, industrial uses, oil, gas, pipelines, farms, agriculture, livestock, landscaping, water diversion, trucks, trailers, liners, and more.
Art Murray, Founder
Phone: 304-276-2625
Email: art@usbelt.com
106 Davistown Road, Mount Morris, PA. Located off Exit 1 of I-79 on the border of Pennsylvania & West Virginia.